IPV6 BGP

Unanswered Question
Aug 21st, 2011

hi , is ASR 9006 RSP or Ethernet line cards support IPV6 BGP because i did not see it in the data sheet?.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
Marcin Latosiewicz Mon, 08/22/2011 - 00:48

Hi,

I don't deal with ASR9k normally but a quick check internally and I do see support for IPv6 address-family IPv6 transport should exist.

Best contact your Cisco SE to know of any restrictions.

IPv6 Unicast Routing on Cisco ASR 9000's A9K-SIP-700

Cisco ASR 9000's A9K-SIP-700 provides complete  Internet Protocol Version 6 (IPv6) unicast capability.

http://www.cisco.com/en/US/docs/routers/asr9000/software/asr9k_r4.1/routing/configuration/guide/routing_cg41asr9k_chapter1.html

Marcin

Samir Meftahi Fri, 09/02/2011 - 11:08

Just over 4k prefixes for now.

Samir

Sent from Cisco Technical Support iPad App

abakhashwin Fri, 09/09/2011 - 08:00

do you think enable IPv6 on internet router Gateway (GSR 12410 with PRP2) having full internet route table for IPv4 and also Plus IPv6 Full internet routing table.

now the CPU utilization is around 50% with IPv4 if we enable the IPv6 how much do you expect the increae in the CPU?.

and how is the IPv6 will be handle.is it extra process in the cpu?. do you have a document to explain?.

ahad@telcoinabox.com Sun, 09/11/2011 - 22:04

You should be fine. No real issues.

I am currently recieving the full routing table on 7301 for IPv4 and IPv6.

Actions

Login or Register to take actions

This Discussion

Posted August 21, 2011 at 12:11 PM
Stats:
Replies:6 Avg. Rating:
Views:865 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard