cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
9689
Views
0
Helpful
22
Replies

the correct way...

IngGerardo013
Level 1
Level 1

Hello guys,

I have the next situation, 9 LAPs 1142N, i wish to convert them to autonomous, it seems that there is a 2 ways, with a simple copy tftp flash: commands and force them to charge the IOS.default  image(holding the mode button), what is the correct way??

I used the first one (copy tftp flash and etc commands) decompressing the winrar file downloaded (c1140-k9w7-tar.124-25d.JA1) and just selecting the .JA file inside, then using the boot system command, but when a try to use the browser appears with out menus! buttons and etc options!, I supose that I need to charge ALL winrar file, but how? some suggestion??

Sorry 4 my English hehehe...

,

1 Accepted Solution

Accepted Solutions

OK, it looks like you are trying a couple of things simultaneously.  You have renamed the image to .default (c1140-k9w7-tar.default) in one instance (to use the mode button).  In another, you have extracted the archive before loading.  The AP trys to extract the file, therefore when it opens the file ending in .JA1 is is confused-- thus the message %Error opening file...

Lets do this, because it seems clear your TFTP is working.

1. Have the following file in the root directory of your TFTP server: c1140-k9w7-tar.124-25d.JA1.tar  ** do not extract this file **

From the AP, it seems you are already addressed and have forced AP to not reload so lets issue the following command...

2. #archive download-sw /f /o tftp:///c1140-k9w7-tar.124-25d.JA1.tar

AP should then be able to "open" the file and with the archive command given above the AP will have extracted the image and overwritten as the boot image and then reload your AP.

Give that a shot and tell us what you find

View solution in original post

22 Replies 22

Roman Rodichev
Level 7
Level 7

use the second method with mode button. the first method is meant to be used from the wlc controller

Sent from Cisco Technical Support iPad App

This is the image with the error, I have connected a direct utp cable between AP and PC, no firewall and no antivirus

Some sugestion?

Did you put your PC NIC card  on the 10.0.0.x network? The AP takes 10.0.0.1 so your PC with the TFTP should be 10.0.0.2 or something higher ..

Did you do that ?

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

Yes I did,

Have you tried this command

archive tar /xtract tftp:///filename.tar flash:

Thanks

NikhiL

HERE, I SHOW THAT I CAN COPY FILES FROM MY LAP-TOP TO THE AP:

4 bytes copied in 0.042 secs (95 bytes/sec)

HERE, I EXECUTE THE RECOMMENDED COMMAND:

AP44d3.ca19.81a6#$ftp://15.10.10.184/c1140-k9w7-mx.124-25d.JA1.rar flash:

Loading c1140-k9w7-mx.124-25d.JA1.rar from 15.10.10.184 (via GigabitEthernet0):

!

%Tar checksum error in fd 0 --------------------------------------- "THIS IS THE ERROR"

AP44d3.ca19.81a6#sh flash:

Directory of flash:/

    2  -rwx        3566   Mar 1 2002 00:29:43 +00:00  private-config

    3  -rwx           4   Mar 1 2002 00:29:00 +00:00  test.txt

    4  -rwx         150   Mar 1 2002 00:14:33 +00:00  event.log

    5  -rwx     4791401   Mar 1 2002 00:52:40 +00:00  c1140-k9w7-mx.124-25d.JA1

    6  -rwx        1048   Mar 1 2002 00:29:44 +00:00  private-multiple-fs

    7  drwx         128   Mar 1 2002 00:02:01 +00:00  c1140-rcvk9w8-mx

   10  -rwx       17468   Mar 1 2002 00:29:43 +00:00  config.txt

   11  -rwx         217   Mar 1 2002 00:53:22 +00:00  env_vars

HERE, I SHOW THAT THERE IS ENOUGH SPACE(THE COMPRESED IMAGE SIZE 5MB):

32126976 bytes total (25048064 bytes free)

AP44d3.ca19.81a6#

If you have downloded the image from Cisco.com, can you try to download the image again from cisco site and extract the file. Just want to make sure the tar file is not corrupt

Thanks

NikhiL

How can I know that(image is not corrupt)??..

Hello,

The alternative method to using the MODE button is as follows:

1. Download the image from cisco.com -- do not modify the file archive.

2. Issue the following commands on the lightweight AP:

debug capwap console cli

archive download-sw /force /over tftp:///

This will automatically download and extract the tar image, and remove the lightweight image (and reload the AP when finished). Please let me know if this works for you!

-Patrick Croak

Wireless TAC

Bad news P. Croak

This was the result:

Hello,

that looks like the file was not found -- we need to remember that the image archive has a file extension of .tar (even if extensions are hidden)

so the command should be:

archive download-sw /force /over tftp://10.0.0.2/c1140-k9w7-tar.124-25d.JA1.tar

Please try this one more time and let me know!

-Pat

The same problem.. despite of pings between them!!

1.  When you performed the "mode" button proceedure, what is the IP address and subnet mask of the TFTP server?

2.  How is your AP connected to your TFTP server?

3.  What application is your TFTP server?

1.- 10.0.0.2 /24 bits

2.- using a small switch

3.- TFTP Server Manager version 4.0

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: