Can't connect to WLAN - trying to setup WLC2100

huwyhuwy123 · ‎09-09-2011

hi there,

I'm trying to setup a WLC2100 to work with a cisco 3750 and an aironet 1130ag (LW).

The problem I'm having is that I see the wireless network but I can't connect to it. Even if I set a static IP it won't ping anything on that network.

I have attached the config of the 3750 as I think its a vlan issue.

The access point is connected to g1/0/29

The WLC is connected to g1/0/42 (ticketing interface)

Can anyone help with this as I can't figure it out?

Cheers,

Huw

Surendra BG · ‎09-09-2011

Hi,

Let the topology bre like this..

WLC --------- Switch ------------ AP

Connect a single port between the switch and the WLC.. the nthen restrict VLANs if needed on the switch!! here is the 2100 best practise guide..

https://supportforums.cisco.com/docs/DOC-11760

Lemme know how this helps!!

Regards

Surendra

Regards
Surendra BG

huwyhuwy123 · ‎09-18-2011

thanks for the response. I managed to get this working following the info here....

http://www.it-book.co.uk/1753/setup-cisco-wireless-controller-and-cisco-aironets