davidhuynh5 Wed, 10/12/2011 - 13:56

Sorry, I should elaborate. I want to create vlan 100, then assign e0 to that vlan.

I can do it on a 5505, but don't see the command on a 5520.

mvsheik123 Wed, 10/12/2011 - 14:00

I don't think ASA5510 and above have that feature. Lets see if we get any other suggestions.

Thx

MS

brendand05 Wed, 10/12/2011 - 18:49

You need to create sub-interfaces first

Int eth0/0.100

Vlan 100

Sent from Cisco Technical Support iPad App

Actions

This Discussion