10-17-2011 11:43 PM - edited 03-07-2019 02:52 AM
I have a cisco L3 switch and two L2-2950 switch how to configure Inter Vlan Routing between them? plz help me to do this
10-17-2011 11:52 PM
Hi,
You just configure L3 switch to act as gateways of all VLANs you want then turn on "ip routing" on it. You just configure trunk interfaces to connect between L2-2950 to connect to L3 switch. Don't forget to add vlan on all switches or use VTP to do so.
HTH,
Toshi
10-17-2011 11:56 PM
Thanks
10-18-2011 12:41 AM
Hello Tanmay,
maybe this link will help you:
http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtml
--
Have a nice day,
Dmitry
10-18-2011 09:05 AM
To configure inter vilan routing between the two switch,configure sub-interface from the routers interface mode and then issue encapsulation dot1q
---
Posted by WebUser Kenechukwu Ogbu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide