10-17-2011 11:43 PM - edited 03-07-2019 02:52 AM
I have a cisco L3 switch and two L2-2950 switch how to configure Inter Vlan Routing between them? plz help me to do this
10-17-2011 11:52 PM
Hi,
You just configure L3 switch to act as gateways of all VLANs you want then turn on "ip routing" on it. You just configure trunk interfaces to connect between L2-2950 to connect to L3 switch. Don't forget to add vlan on all switches or use VTP to do so.
HTH,
Toshi
10-17-2011 11:56 PM
Thanks
10-18-2011 12:41 AM
Hello Tanmay,
maybe this link will help you:
http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtml
--
Have a nice day,
Dmitry
10-18-2011 09:05 AM
To configure inter vilan routing between the two switch,configure sub-interface from the routers interface mode and then issue encapsulation dot1q
---
Posted by WebUser Kenechukwu Ogbu
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: