×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

RV042 multiple private networks, one internet connection

Unanswered Question
Nov 2nd, 2011
User Badges:

I'm trying to configure an RV042 to route between two private networks. 


I'm getting internet access from an ISP via WAN1. (WAN1 IP 192.168.0.2/24 192.168.0.1GW)

Private network A is 192.168.200.0/24 is completely local and I have it configured on the LAN.


Private network B is 10.50.3.96/27  (WAN2 10.50.3.126 10.50.3.97GW) is currently a single network but will eventually be connected to a larger routed network through the 10.50.3.97GW .


I only want internet for network A. 

I don't need network A to see more than the B network.

I need network A to get to B and B to get to A.


Is this possible with an RV042?


Is it possible using multiple subnets and having Network A & B on the LAN ports?



THANKS in advance from the top of a very cold mountain in Whitefish Montana!



BTW  - It's currentyl in GATEWAY mode but I've tried router mode and have tried adding a static route to B) on WAN2.  I've also added an ALLOW ALL to WAN2. 



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion