×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

netflow on ASR1001

Unanswered Question
Nov 4th, 2011
User Badges:
  • Bronze, 100 points or more

To enable netflow export on ASR1001, do i need the firewall feaure license or not ?

Docs are not really clear, NBAR requires FW license, but i am unsure about Netflow



regards,

Geert

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Reza Sharifi Fri, 11/04/2011 - 06:53
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

You don't need any license for netflow:


Cisco IOS XE Software Feature License Types



Cisco  IOS XE Software also offers you a granular licensing schema. You can  select individual feature licenses based on your specific feature  support requirements. Specific feature licenses are provided in  right-to-use (RTU), number-of-sessions (NOS), or both formats, depending  on the type of feature being licensed. An NOS license is for the  maximum number of simultaneous sessions that are allowed on the Cisco  ASR 1000 Series platform. At FCS the following features are licensed  separately: IP Security (IPsec) encryption, Firewall, Flexible Packet  Inspection (including Network-Based Application Recognition [NBAR] and  Flexible Packet Matching), Broadband Aggregation, and Cisco Unified  Border Element (SP Edition) (also known as Session Border Controller  [SBC]). Licenses are not required for Network Address Translation (NAT), NetFlow, generic routing encapsulation (GRE), or basic routing  services.

http://www.cisco.com/en/US/prod/collateral/routers/ps9343/product_bulletin_c25-448292.html


HTH

Actions

This Discussion