cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
18328
Views
30
Helpful
39
Replies

Ask the Expert:Understanding WAAS Platform

ciscomoderator
Community Manager
Community Manager

With Michael Schueler

Read the bioRead the bio

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn about resolving configuration problems on the WAAS platform that are not directly related to the WAAS software.

Peter Van Eynde is a customer support engineer in the Technical Assistance Center in Belgium, where he supports content technologies including Cisco Wide Area Application Services (WAAS), Cisco Application and Content Networking System (ACNS), and Cisco Content Delivery System Internet Streaming (CDS-IS). He holds CCIE certification #23042 in Security.

Michael Schueler has been a Cisco support engineer in the Cisco Technical Support Assistance team in Germany for more than 4 years. He and is an expert on content technologies including Cisco Wide Area Application Services (WAAS), Cisco Application and Content Networking System (ACNS), Cisco Content Delivery System Internet Streaming (CDS-IS), and Cisco Digital Media Suite (DMS). He holds CCIE certification #23835 in Security.

Remember to use the rating system to let Peter and Michael know if you have received an adequate response.  

They might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the discussion forum shortly after the event. This event lasts through November 18, 2011. Visit this forum often to view responses to your questions and the questions of other community members.

There will also be a live webcast on this subject on Tuesday, November 15, at 2 p.m. Pacific Time and 5 p.m. Eastern Time. During the live event, Cisco subject matter expert Bhavin Yadav will be presenting on how to troubleshoot WAAS Application Optimizations (AO) effectively. He will focus more on individual AO troubleshooting and he will explain about the different ways to work around AO issues with minimum impact to the traffic.

To register for this live webcast: visit, http://www.ciscolive.com/ate/index.php?sid=203284_2

39 Replies 39

Hi there,

can you quickly compare WAAS with ACNS and ECDS?

Regards,

Tenaro

Hello Tenaro,

ACNS and ECDS are designed for efficient delivery of video and other media assets. In addition, ACNS can also act as an HTTP/HTTPS proxy. Both ACNS and ECDS require a device at the client-side only in order to apply their optimizations (although in most network designs a device close to the server is recommended as well). In terms of ECDS clients are usually redirected to the appropriate service engine using DNS. With ACNS we can also leverage WCCP or even configure ACNS as direct or dynamic proxy in the client's browser.

WAAS on the other hand can provide benefits with a much larger variety of content and protocols - like HTTP, HTTPS, CIFS, NFS, MAPI (Exchange), VDI, live video and even legacy protocols (via TFO, LZ and DRE) -, but has less features and is thus not as flexible in terms of video. WAAS always requires accelerators to be installed at both the client side and the server side. With WAAS traffic optimization is completely transparent to both the clients and the servers. Also, while ACNS and ECDS can only help with server to client traffic, WAAS optimization works in both directions and even between multiple branch offices.

Please find further information on WAAS features here:

http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps6870/prod_white_paper0900aecd8051d5b2.html

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/intro.html#wp1122157

Good further reading regarding ACNS and ECDS can be found here:

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/acns/v55_13/configuration/central/guide/9136intr.html

http://www.cisco.com/en/US/partner/docs/video/ecds/2.5/configuration_guide/prodview.html

Best regards,

Michael

Hi 

Greetings

Would you please help me by leting me know how can i  deploy vWAAS in my network. I have 2 br router with one master controller at hub. All are cisco isr 4451 router. I have 8 spoke site which have 2 leased line terminatetd on  2 separate br router. I have vWAAS-RTU-2500 and ISR-RTU-2500 License. Would you please help me by leting me know how to start for installation and deploying vWAAS in my network. I dont get any proper way how to start the deployment process. Would you please help me in this regard.  It will be great help for me. 

Looking forward with hope for your kind reply on this. 

Thanks

Bhaskar Deb

CSCO10662744_2
Level 1
Level 1

Could you please tell me if WAAS supports the following features:

1. cache multimedia content such as YouTube video clips

2. optimize external SSL traffic on the Internet (websites whose SSL certs are not under our control)

3. optimize cloud / Internet traffic, when there's no peer WAAS on the other end of the flow

thanks,

Kevin

Hello Kevin,

> 1. cache multimedia content such as YouTube video clips

Yes, WAAS supports caching of multimedia content including YouTube and Cisco Show and Share video clips via its DRE ("Data Redundancy Elimination") feature.

The DRE feature has been further enhanced in WAAS version 4.4. Please find further information on these enhancements here:

http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps6870/white_paper_c11-676350.html

> 2. optimize external SSL traffic on the Internet (websites whose SSL certs are not under our control)

WAAS can do TFO (TCP Flow Optimization) on such SSL traffic only, which includes optimizations like TCP Window Scaling or Selective ACK (SACK). To be able to apply any application layer (layer 7) optimization or effective compression and caching to SSL traffic WAAS needs to have the SSL key.

Please find further information on TFO here:

http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps6870/prod_white_paper0900aecd8051d5b2.html#wp9000046

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/intro.html#wp1122178

> 3. optimize cloud / Internet traffic, when there's no peer WAAS on the other end of the flow

WAAS always requires a peer at the other end of the flow in order to be able to apply any optimizations.

Best regards,

Michael

Hello Kevin,

I would like to add a few minor comments to the answer of Michael:

1 the caching for multimedia content will be better then using a normal web proxy because we cache the content based on the content itself, not on the URL. So if the video is the same, but the URL is different we will still service it from the DRE cache.

However the 'central' WAAS device still needs to download the whole video again to check if the content is indeed the same. So the saving will be on the internal WAN connection, not on the connection to the internet.

3 For the cloud we now have vWAAS (http://www.cisco.com/en/US/products/ps11231/index.html) which you can run on your cloud setup to accelerate traffic. Provided of course you have a Nexus 1000v switch to redirect traffic from the virtual client machines to the vWAAS.

Best regards, Peter

Thank you both for the prompt responses.

Sveta Prutikova
Level 1
Level 1

Hi, Quick question: How can I monitor the health of the WAE device using SNMP?

Hi Steva,

There are several things you can do to check the health of a WAAS device using SNMP:

  1. Monitor the WAAS for any alarms using CISCO-CONTENT-ENGINE-MIB.
  2. Via HOST-RESOURCES-MIB you can monitor system uptime (hrSystemUptime) and CPU usage (hrProcessorLoad).
  3. Use CISCO-WAN-OPTIMIZATION-MIB to monitor the number of currently optimized connections via the cwoTFOStatsActiveConn object.
  4. Use IF-MIB to monitor the interfaces (ifOperStatus, ifHCInOctets, ifHCInUcastPkts, ifHCOutOctets, ifHCOutUcastPkts).

Note, that memory usage usage is expected to be high on WAAS systems in production. So monitoring memory usage usually does not make much sense.

You can find further information regarding what SNMP MIBs are supported on WAAS and how to configure SNMP here:

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/SNMP.html#wp1118306

Best regards,

Michael

Hi,

i have a Problem with the new Cisco Wave 694 and the Power Supply.

In this Hardware are two Power Supplys are installed. Both Supplys are running good but in the Central Manager i have a Message that called "Power Supply Unit (PSU1) reports AC lost".

The Software Version ist 4.4.1.

Any Idea?

Thanks for help

Andreas

Hi Andreas,

This sounds related to the issue documented in bug ID CSCtq33146 ("PSU "No Power" Alarm Raised After AC Power Cycle") , which is fixed in WAAS version 4.4.3 (I would rather recommend 4.4.3b, though, unless you are using virtual blades, as it addresses a recently discovered Apache vulnerability) and later.

Please try, if any of the following workarounds fixes the issue:

---snip---

  • Perform a graceful DC power off using the CLI command "shutdown poweroff" before turning off the AC power supply.

OR

  • If the device lost power for any unexpected reason and the "no power" alarm exists, check the PSU status by using the command "show hardware | inc Power". Look for status of the PSU reported in the alarm.  If there is a mismatch in the status, clear SEL logs using "clear bmc event-log" and reboot the device.

---snip---

If the above should not help, I would recommend to open a TAC case, as we would need to get a sysreport from the device to further analyze this.

Best regards,

Michael

hi sir.

I have been assigned a project to install 20 ip cameras at 7 different locations ..and one locations would be considered as a head office .. and the data of 7 locations cameras should be stored at head office ... can you please guide me thourgh this ,, espically regarding the selcetion of cisco routers for routing ,,, your cooperation in this regard will be highly appreciated

Hello Ahsan,

I fear that we support WAAS and assorted technologies, physical security products are not one of them. Maybe you should ask this question the in forums for physical security:

https://supportforums.cisco.com/community/netpro/security/physical-security?view=discussions

A quick search shows some interesting documents at

http://www.cisco.com/en/US/partner/netsol/ns929/networking_solutions_design_guidances_list.html

But it is not clear to me that this is the products you have to use. Still they in any case seem worth a read.

Good luck, Peter

robertsoto
Level 1
Level 1

Hello,

My client have a  ALLOT  and they need that Cisco WAAS can to work with it.

I need to know what is the best  design for this case.

First     : SW - WAAS -  ALLOT - ROUTER

Second:  SW - ALLOT - WAAS - ROUTER.

Well thanks,

I hope your soon answer.

Thanks,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: