×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

edge distribution / enterprise edge models

Answered Question
Nov 9th, 2011
User Badges:

Hi all


Can you tell me what the majority use for your edge distribution model and enterprise WAN model


We have a a campus core which should connect to the edge,


would you typically go from core, to a firewall, then to a mulitlayer switch or ASR router, then this would connect your internet / WAN models etc ?

Correct Answer by Latchum Naidu about 5 years 9 months ago

Hi Carl,


That is what good and as per best practice.

So that your ASR routers facing your provider switches at perimeter.
And your ASA outside interface will connect to your ASR and inside interface to your core switch


Please rate the helpfull posts.
Regards,
Naidu.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Latchum Naidu Wed, 11/09/2011 - 05:01
User Badges:
  • Blue, 1500 points or more

Hi Carl,


I would like and hoping as best practice like this...


1. ASR routing facing the internet/WAN
2. Your Firewall connect to your ASR router.
3. Firewall connect to your Core or multi layer switch.


Please rate the helpfull posts.
Regards,
Naidu.

carl_townshend Wed, 11/09/2011 - 05:42
User Badges:

hi there


My idea, would be


Core connects to ASA firewall


outside interface connects to vlan on 2 x ASR routers running HSRP


ASR router then connects to third party WAN switches,  Internet firewall, VPN module etc


this sound good ?

Correct Answer
Latchum Naidu Wed, 11/09/2011 - 05:46
User Badges:
  • Blue, 1500 points or more

Hi Carl,


That is what good and as per best practice.

So that your ASR routers facing your provider switches at perimeter.
And your ASA outside interface will connect to your ASR and inside interface to your core switch


Please rate the helpfull posts.
Regards,
Naidu.

zappo0305 Wed, 11/09/2011 - 06:00
User Badges:

replace Asa with juniper


Sent from Cisco Technical Support iPhone App

Actions

This Discussion