×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Nexus 7k upgrade failure

Unanswered Question
Nov 9th, 2011
User Badges:

I've been trying to upgrade out 7k to 5.1.3 via ISSU and keep running into failures.  Does anyone know where I can look up the error code listed below?


Notifying services about system upgrade.


[#                   ]   0% -- FAIL. Return code 0x40B30029 (Operation failed. Fabric is already locked).

Pre-Upgrade check failed. Return code 0x40B30029 (Operation failed. Fabric is already locked).


n7k-1# install all kickstart bootflash:n7000-s1-kickstart.5.1.3.bin system bootflash:n7000-s1-dk9.5.1.3.bin


Verifying image bootflash:/n7000-s1-kickstart.5.1.3.bin for boot variable "kickstart".


[####################] 100% -- SUCCESS


Verifying image bootflash:/n7000-s1-dk9.5.1.3.bin for boot variable "system".


[####################] 100% -- SUCCESS


Verifying image type.


[####################] 100% -- SUCCESS


Extracting "lc-f1-n7k" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.


[####################] 100% -- SUCCESS


Extracting "bios" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.


[####################] 100% -- SUCCESS


Extracting "lc-m1-n7k" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.


[####################] 100% -- SUCCESS


Extracting "system" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.


[####################] 100% -- SUCCESS


Extracting "kickstart" version from image bootflash:/n7000-s1-kickstart.5.1.3.bin.


[####################] 100% -- SUCCESS


Extracting "lc-m1-n7k" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.


[####################] 100% -- SUCCESS


Extracting "lc-f1-n7k" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.


[####################] 100% -- SUCCESS


Extracting "cmp" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.


[####################] 100% -- SUCCESS


Extracting "cmp-bios" version from image bootflash:/n7000-s1-dk9.5.1.3.bin.


[####################] 100% -- SUCCESS


Performing module support checks.


[####################] 100% -- SUCCESS


Notifying services about system upgrade.


[#                   ]   0% -- FAIL. Return code 0x40B30029 (Operation failed. Fabric is already locked).


Pre-Upgrade check failed. Return code 0x40B30029 (Operation failed. Fabric is already locked).


n7k-1# sh ver


Cisco Nexus Operating System (NX-OS) Software


TAC support: http://www.cisco.com/tac


Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie


s_home.html


Copyright (c) 2002-2010, Cisco Systems, Inc. All rights reserved.


The copyrights to certain works contained in this software are


owned by other third parties and used and distributed under


license. Certain components of this software are licensed under


the GNU General Public License (GPL) version 2.0 or the GNU


Lesser General Public License (LGPL) Version 2.1. A copy of each


such license is available at


http://www.opensource.org/licenses/gpl-2.0.php and


http://www.opensource.org/licenses/lgpl-2.1.php


Software


  BIOS:      version 3.22.0


  kickstart: version 5.1(2)


  system:    version 5.1(2)


  BIOS compile time:       02/20/10


  kickstart image file is: bootflash:///n7000-s1-kickstart.5.1.2.bin


  kickstart compile time:  12/25/2020 12:00:00 [12/18/2010 03:55:20]


  system image file is:    bootflash:///n7000-s1-dk9.5.1.2.bin


  system compile time:     11/29/2010 12:00:00 [12/18/2010 05:02:00]


Hardware


  cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")


  Intel(R) Xeon(R) CPU         with 8260944 kB of memory.


  Processor Board ID JAF1507CCSH


  Device name: n7k-1


  bootflash:    2029608 kB


  slot0:              0 kB (expansion flash)


Kernel uptime is 25 day(s), 22 hour(s), 39 minute(s), 17 second(s)


Last reset


  Reason: Unknown


  System version: 5.1(2)


  Service:


plugin


  Core Plugin, Ethernet Plugin


CMP (Module 5) ok


CMP Software


  CMP BIOS version:        02.01.05


  CMP Image version:       5.1(1) [build 5.0(0.66)]


  CMP BIOS compile time:   8/ 4/2008 19:39:40


  CMP Image compile time:  11/29/2010 12:00:00


CMP (Module 6) ok


CMP Software


  CMP BIOS version:        02.01.05


  CMP Image version:       5.1(1) [build 5.0(0.66)]


  CMP BIOS compile time:   8/ 4/2008 19:39:40


  CMP Image compile time:  11/29/2010 12:00:00


n7k-1# dir flash:


No such file or directory


n7k-1# dir


        279    Mar 04 11:53:36 2011  JAF1443BPAJ_155080054.lic


  146170914    Mar 04 11:52:23 2011  n7000-s1-dk9.5.1.2.bin


  146701191    Nov 08 13:54:42 2011  n7000-s1-dk9.5.1.3.bin


  146258490    Nov 05 23:40:49 2011  n7000-s1-dk9.5.1.5.bin


   30687232    Mar 04 11:51:32 2011  n7000-s1-kickstart.5.1.2.bin


   30674944    Nov 08 13:56:01 2011  n7000-s1-kickstart.5.1.3.bin


   30515200    Nov 05 23:38:27 2011  n7000-s1-kickstart.5.1.5.bin


       4096    Nov 02 11:31:34 2011  vdc_2/


       4096    Mar 04 12:37:32 2011  vdc_3/


       4096    Mar 04 12:37:32 2011  vdc_4/


      13284    Nov 02 13:11:12 2011  vlan.dat


Usage for bootflash://


  658649088 bytes used


1180209152 bytes free


1838858240 bytes total

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jim Moore Fri, 11/11/2011 - 10:49
User Badges:

Can you issue the following command to see what or who has a lock.


show cfs lock


Once you know what has the lock you should be able to clear it.

drivenbabs1 Wed, 01/28/2015 - 05:31
User Badges:

How do we clear the lock once we know who has the lock?

 

Actions

This Discussion