Can a Cisco SG300-28P switch be used with the expansion port on a UC540W?
Marcus Casimir wrote:
"Friends don't let friends use SIP!"
Of course they do Friends don't let Friends stay in a proprietary world, friends encourage other friends to work within an open socieity (LONG LIVE FOSS!!)
Errr back on topic
Devin make sure you upgrade your SG/SF to version 1.1.8, I have had the best success with this revision and it is the latest (Last time I looked). But here is a hint, make sure that within CCA you go to the SmartPort configuration of that switch (Right Click on it) and set all the ports up to "IP Phone+Desktop" and the ports that is plugged into the expansion port set for "Switch" and make changes to the other ports that require it to their appropriate settings.
The SF/SG series switches do not seem to accept the changes as fluid as the ESW range did, they are pretty good switches, don't get me wrong, but their interoperability with CCA/UC still seems to be a little off.
Be sure to upgrade the firmware on the switch and it will work with no
SBSC UC Support Engineer
CCNA, SCCP SIP certified
10:00am to 7:00pm EST
Monday to Friday
Office +1 (866) 606-1866 ext. 601050
Fax +1 (866) 875-3916
Cisco Steps to success for UC500 platform
Cisco SMB support forum
Cisco Technical Enablement Labs
Partner CVENT Calender
Yes. The 200 and 300 series are supported via CCA also.