cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1068
Views
0
Helpful
3
Replies

Cannot access IPS 4260

Luis Carranza
Level 1
Level 1

Hi guys:

Recently I have a problem with an IPS 4260, I was trying to access through IDM and it won't let me, it always bring this message:

errSystemError-ct-sensorApp.426 not respongin. please check system processes - The connect to specified Io:: ClientPipe failed

In fact I also cannot access through CLI, do you have any suggest.

Regards

1 Accepted Solution

Accepted Solutions

rhermes
Level 7
Level 7

Have you set the allowed hosts yet?

If you have, is the IP address of the client your using in that list?

Have you rebooted the 4260?

- Bob

View solution in original post

3 Replies 3

rhermes
Level 7
Level 7

Have you set the allowed hosts yet?

If you have, is the IP address of the client your using in that list?

Have you rebooted the 4260?

- Bob

Bob:

Yes I have allowed the host, well in fact I have allowed the entire network segment. And about the restart of the device I haven't tried I need to schedule that with my customer.

Regards

Bob:

I already solve the issue, I got access through CLI and I look at the SH VER that one of the engines was stopped so I create a service account which on I could access into the device and restarted the Engines. That solved the problem.

Thank you for your help.

Regards

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: