NAT Issues with PAT

Unanswered Question
Nov 17th, 2011

Hi All

I have a lab setup to try and resolve an issue on a production network as below.

IPT-DIAL rev1 0.jpg

The internal switches are each site are configured with the Cisco HTTP server and these are accessible from within each site and from the remote site via a site-to-site vpn.  I have configured NAT overload for external connectivity and static nat for the web servers at each site using both 80 and 443.  The Cisco switches respond with authentication but the web pages are not displayed.

Is there something that I missing here or a know issue?

Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
Farrukh Haroon Sun, 11/20/2011 - 02:25

If you reaching through the VPN, this should be transparent to this switch and should work.

Can you telnet on the 80 and 443 ports to the remote webserver?

Please post your config.

Regards

Farrukh

Actions

Login or Register to take actions

This Discussion

Posted November 17, 2011 at 2:47 AM
Stats:
Replies:1 Avg. Rating:
Views:518 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard