11-22-2011 11:06 AM - edited 07-03-2021 09:06 PM
hi,
is there a chance that Mesh APs will not associate with LWAPP imaged Controllers ? is it necessary that both AP and Controller shoud be mesh imaged ?
can we convert them Mesh APs to normal LWAPP mode ?
thanks,
Anvar
11-22-2011 11:10 AM
Translating "CISCO-LWAPP-CONTROLLER"...domain server (86.51.34.17) (86.51.35.18)
*Nov 22 19:38:05.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.10.11 peer_port: 5246
*Nov 22 19:38:06.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Nov 22 19:38:07.681: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.0.10.11 peer_port: 5246
*Nov 22 19:38:07.682: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.10.11
*Nov 22 19:38:07.682: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Nov 22 19:38:07.828: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Nov 22 19:38:07.830: %DTLS-5-ALERT: Received WARNING : Close notify alert from 10.0.10.11
*Nov 22 19:38:07.830: %DTLS-5-PEER_DISCONNECT: Peer 10.0.10.11 has closed connection.
*Nov 22 19:38:07.831: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.0.10.11:5246
*Nov 22 19:38:07.876: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 22 19:38:07.876: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 22 19:38:13.957: status of voice_diag_test from WLC is false
AP44d3.cae5.7a20#
AP44d3.cae5.7a20#
*Nov 22 19:38:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.10.11 peer_port: 5246
*Nov 22 19:38:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
11-22-2011 01:20 PM
What firmware is your controller?
11-22-2011 08:13 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide