t.svatek Wed, 11/23/2011 - 10:16
User Badges:

there is no Port reference for any Endpoint like EX90, EX60 and C-Codecs. The Port References for TMS, MCU and VCS are also very different.


You can advise the needed ports by looking into this doc:

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_IP_Port_Usage_for_Firewall_Traversal_Deployment_Guide_X4_to_X7.pdf


I wish for christmas a complete port reference for all boxes.

John Regan Thu, 11/24/2011 - 06:41
User Badges:
  • Cisco Employee,

Hello,


There were these documents H323 and SIP but these are now outdated I believe as you can set the range of media ports use in the codecs by the commands ...


xConfiguration RTP Ports Range Start: 2326

xConfiguration RTP Ports Range Stop: 2486


in the later releases of TC software (TC4/5), so now for the media you can define the port range used.  SIP and H323 signalling will still use the ports mentioned in the documentation.


Thanks

Actions

This Discussion