11-24-2011 03:27 AM
hello,
to customise my SSL VPN portal these are the commands I typed, I took them form one of the cisco user guide configuration, but unfortunately, the router does not recongnise those commands. I don't know what's wrong.
- customise the SSL VPN Portal
(config)# webvpn context SecContext
(config-webvpn-context)# login-message “please enter your credentials”
(config-webvpn-context)# title “SecContext SSL VPN Service”
(config-webvpn-context)# secondary-color darkseagreen
(config-webvpn-context)# title-color #808080
(config-webvpn-context)# logo logohome.gif
(config-webvpn-context)# text-color white
(config-webvpn-context)# secondary-text-color black
config-webvpn-context)# exit
I also typed the commands that follows. but when I authenticate successfully, nothing appears that is I don't have any output. please do some one help me.
- access servers configuration
(config)# webvpn context SecContext
(config-webvpn-context)# url-list ListForClientlessUsers
(config-webvpn-url)# url-text “IntranetServer” url-value serverurl
(config-webvpn-url)# heading “ClientlessAccess”
(config)#ip name-server dnsserveraddress
- outlook server configuration
(config)# webvpn context SecContext
(config-webvpn-context)# url-list WebOutlook
(config-webvpn-context)# url-text “OutlookWebAccess” url-value serverurl
(config-webvpn-context)# heading “OutlookWebAccess"
- map the URL list above to the policy group
(config)# webvpn context SecContext
(config-webvpn-context)# policy group SecDefaultPolicy
(config-webvpn-policy)# url-list WebOutlook
(config-webvpn-policy)# url-list ListForClientlessUsers
(config-webvpn-policy)# hide-url-bar
I am using a cisco 20811 router IOS version 12.4(13r)T
thanks.
11-24-2011 06:36 AM
Please post the whole config.
show run | sec webvpn
Is the default-group configured?
11-24-2011 07:01 AM
the default group is the same as the group configured.
11-24-2011 08:27 AM
the show run | sec webvpn command did show any result. this is part of the result of th show run command
webvpn gateway RingoGW
ip address x.x.x.x port x.x
http-redirect port x
ssl trustpoint TP-self-signed-2814278058
inservice
!
webvpn context SecContext
title "testsite"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
!
url-list "ListForClientlessUsers"
heading ".ClientlessAccess."
url-text ".IntranetServer." url-value " "
!
login-message "testsite"
!
policy group SecDefaultPolicy
url-list "ListForClientlessUsers"
timeout idle 100
timeout session 36000
default-group-policy SecDefaultPolicy
aaa authentication list sslvpn
gateway RingoGW domain domain.com
max-users 2
inservice
!
end
thank you.
11-24-2011 08:58 AM
infatct, I that output is for clientless mode of the ssl vpn.
But please tell me appart from Anyconnect, do you know any other ssl client, compatible with all operating systems, I can configure for my vpn?
because Anyconnect package is not install on my router.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: