11-24-2011 11:22 PM - edited 07-03-2021 09:07 PM
Hello,
We have LAP1242 registered to wlc. The initial config was done by someone. Now I try to access the LAP with telnet or http but failed. So is the serial port my only way to get access to it and config? However, the LAP is mounted under the ceiling.
11-25-2011 12:37 AM
Hi Jimmy,
If you want to ssh to ap, you can enable the same from the WLC, using the command " config ap ssh enable
Can you let me know why you need to access the AP, as all the config is done from the WLC
Thanks
NikhiL
11-28-2011 09:31 PM
u need to enable telnet o ssh in the AP config on the WLC..I beliebe it is in the advance tab..the last one from left to right.
---
Posted by WebUser Sebastian Helmer
11-28-2011 09:32 PM
U can do it from the webinterface too if u prefer that
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
