×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Video Streaming From Inside to outside via Static Nat

Unanswered Question
Nov 28th, 2011
User Badges:

Hi Guys,


I've a security camera server located "inside" the network, i did a static nat for it, to be accessible from outside (internet) and be able to view the video streaming.


static (inside, outside) 192.168.1.3  1.2.3.4

access-list out_acl permit ip any host 1.2.3.4


i can access the server from outside using 1.2.3.4 ip address (via the web browser) & log-in to it, but when i reach to the web streaming page, i just see a white page.


From inside (using 192.168.1.3, i can access it and see the video streaming normally)


i tried to configure multicasting but no luck (by specifing PIM rp-address), i also played with the inspection but same problem.


what colud be the issue?  any idea how to solve this in order to be able to view the video streaming from outside?


Thanks & Regards,


Rami

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Lee Valentin Mon, 11/28/2011 - 02:59
User Badges:

Try disabling fixup protocol rtsp


if that doesn't work, call the camera Manufacturer and ask them which ports need to be opened.


there could be more protocols that are being inspected that the camera requires for functionality.


good luck.

Actions

This Discussion