×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Xbox live

Unanswered Question
Nov 28th, 2011
User Badges:

I have an ASA 5501 running latest code. Per the article at http://support.microsoft.com/kb/908874, I need to open the below ports. I have 5 Xboxes (when people come over) and they all have a static IP. My network is 192.168.0.x and is a /24 network.


Xbox LIVE requires the following ports to be open:

  • Port 88 (UDP)
  • Port 3074 (UDP and TCP)
  • Port 53 (UDP and TCP)
  • Port 80 (TCP)
  • port 1863 (UDP and TCP) (Kinnect)


I defined the various network ports as a service and then created 5 hosts called xbox1, 2, etc with a static IP.


I dont have access from the command line (forgot telnet and ssh passwords) , so from the gui, what do I do next?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Julio Carvajal Tue, 11/29/2011 - 09:04
User Badges:
  • Purple, 4500 points or more

Hello Michael,


So you already have a static one to one translation for those particular xbox units( each one of them has a public ip) right??


Now all you need to do is to create an acl on inbound direction on the outside interface opening the ports you need.


Let me know if this is enough clear.


Regards,


Julio

micwill3 Tue, 11/29/2011 - 09:06
User Badges:

Sorry, I don’t have a clue on what to do next nor how to do it.

Julio Carvajal Tue, 11/29/2011 - 09:13
User Badges:
  • Purple, 4500 points or more

Hello Michael,


Okay I want you to go to the comman-line interface on the ASDM,that  its on the Tools tab.


Now I want you to add the following commands:


Show run static ( From this output I will need the ones with the private IP address of the xbox machines)

Show run access-group ( From this I will need you to focus on the one that says access-group xxx in interface outside)

show run access-list xxxx ( Where the xxx is the one from the access-group we disccused before)


Regards,


Julio

micwill3 Tue, 11/29/2011 - 09:17
User Badges:

OK, thanks for the help. It will be tonight before I can do this as I am remote and don’t allow access from the outside interface.

Julio Carvajal Tue, 11/29/2011 - 09:23
User Badges:
  • Purple, 4500 points or more

Hello Michael,


I am more than glad to help,let me know any updates.


Please rate helpful posts!!!



Julio

Actions

This Discussion