ASA 5505 transparent mode setup

Unanswered Question
Dec 5th, 2011

Hi guys,

i need to configure a ASA 5505 in transparent mode.

learned from Internet, my configuration is :

int e0/0 --- vlan 1---->nameif outside

int e0/4 --- vlan 2------> nameif inside

gloable ip is 172.17.104.10 255.255.255.0

http server enable

http 172.17.104.0 255.255.255.0 inside

when i connect the outside interface to one PC with ip addr 172.17.104.194

my PC connect to inside interface with ip 172.17.104.249

cannot ping each other even when i set rules as permit any any on both direction

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
varrao Tue, 12/06/2011 - 02:03

Hi,

Can you send me an output of "show run interface", moreover you have the https server enabled on the inside interface and not on the outside.

Thanks,

Varun

p0663843ccie Tue, 12/06/2011 - 03:44

hi man thanks for reply the issue was resolved. one vlan was down i did not notice

Sent from my iPhone

Actions

Login or Register to take actions

This Discussion

Posted December 5, 2011 at 11:32 PM
Stats:
Replies:2 Avg. Rating:
Views:720 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard

Rank Username Points
1 7,861
2 6,140
3 3,170
4 1,473
5 1,446