12-05-2011 11:32 PM - edited 03-11-2019 02:59 PM
Hi guys,
i need to configure a ASA 5505 in transparent mode.
learned from Internet, my configuration is :
int e0/0 --- vlan 1---->nameif outside
int e0/4 --- vlan 2------> nameif inside
gloable ip is 172.17.104.10 255.255.255.0
http server enable
http 172.17.104.0 255.255.255.0 inside
when i connect the outside interface to one PC with ip addr 172.17.104.194
my PC connect to inside interface with ip 172.17.104.249
cannot ping each other even when i set rules as permit any any on both direction
12-06-2011 02:03 AM
Hi,
Can you send me an output of "show run interface", moreover you have the https server enabled on the inside interface and not on the outside.
Thanks,
Varun
12-06-2011 03:44 AM
hi man thanks for reply the issue was resolved. one vlan was down i did not notice
Sent from my iPhone
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide