×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CIDR and WAN ip on pix 515

Unanswered Question

I have a pix515e setup using a wan ip block right now.


We just changed internet providors and now we have the folllowing config.

Net Mask:           255.255.255.240

Gateway              24.248.7.129

IP                            24.248.7.133

DNS:                      68.105.28.16,68.105.29.16



Cidr Block (inside)


Subnet:                24.249.187.144

Net Mask:           255.255.255.240

IP Address.         24.249.187.145-159


Recommendation from Cox:


.145  should be used as the Gateway

.159 should be used as the Broadcast



How would I setup the Cidr block on the pix?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Tue, 12/06/2011 - 09:54
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Chris


Do you mean the pix outside interface has an IP of  24.248.7.133 ?


If so does this mean you want to use the 24.249.187.144 subnet on the inside of your Pix ? And if you do do you actually want to assign these public IPs to actual NICs on internal devices or do you want to use private IP addressing on your internal devices and then use NAT on the pix with the 24.249.187.144 devices ?


Jon

mvsheik123 Tue, 12/06/2011 - 10:11
User Badges:
  • Gold, 750 points or more

I guess your ISP expecting a router between PIX & his gear (PIX--> router--> ISP). Talk to your ISP and ask for /28 ip with direct ethernet handoff. if not, ask ISP to arrange a router as well.



Thx

MS

Actions

This Discussion