×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Nexus 5596 and Qlogic 8150

Unanswered Question
Dec 6th, 2011
User Badges:

I am having a problem with getting the Qlogic 8150 working in a windows 2008 R2 server. I have the SAN connectivity working but I am having problem with  the networking.


I have setup VLAN 666 as the data vlan


On the ethernet trunk I have setup


ethernet 1/17

switchport mode trunk

switchport trunk allowed vlan 666 

spanning-tree port type edge trunk

This does not work but if I allow VLAN 1 on the trunk it works and I have full IP connectivity.

switchport trunk allowed vlan 666,1
Any ideas why adding VLAN 1 on the trunk makes everything work
Thanks
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Darren Ramsey Wed, 12/07/2011 - 20:45
User Badges:
  • Silver, 250 points or more

You set vlan 666 as the VlanID under the Qlogic adapter advanced properties, right?  Should be the last value in the scroll box.

Actions

This Discussion

 

 

Trending Topics: Storage Networking