ā12-08-2011 02:47 PM - edited ā03-16-2019 08:27 AM
Dear all,
i need help is there any way to configure FAC in CME 7.0.as i need to block international access on pots & voip dail peers using FAC code all the time not only after office hrs.
i have gone through all the doc related to call blocking but while configuring the same. i face below mentioned issue
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html
1) how can I block the dial peer for all times. The option I have is to restrict only during specified timings.
2) According to the document I configured "login" in the template, and the login does work, but it does not matter whether I am logged in or not, the calls are still going through.
I would appreciate if some one has alreday done this & help me out ..
ā12-08-2011 02:56 PM
Hi there,
Forced Authorization Codes were introduced in CME 8.5 and later:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefac.html#wp1011721
Feature Name | Cisco Unified CME Version | Modification |
---|---|---|
Forced Authorization Code | 8.5 | Introduced the FAC feature. |
HTH,
Chris
ā12-09-2011 01:37 AM
I know this feature is avialable in 8.5 version , but is there any workaround for this in 7.0 version.
ā12-09-2011 01:53 AM
Hi
As a workaround, You can use script mentioned in below link. Name of script is " Clid_authen_collect.tcl "
http://www.cisco.com/en/US/docs/routers/access/as5350/software/feature/guide/pull_ivr.html#wp1021162
Please note :- The scripts are not supported by TAC.
regards
Ronak Patel
ā12-09-2011 02:11 AM
Thanks Ronak for your valuable inputs..
but when i try to put below mentioned cmmd in my cme router there is no such cmmd available my CME IOS verison is 15.0 M7
call application voice
ā12-09-2011 02:48 AM
hi
Command is changed use following command.
Router(config)#application
Router(config-app)# service ?
Regards
Ronak Patel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide