×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

UC560 - Blast Group - No Answer Forward

Unanswered Question
Dec 10th, 2011
User Badges:

Hello Everyone.  I have a question on blast groups in a multisite environment with the 8.2  software pack. 


In this environment, a call come into Site B and is routed intersite to a blast group in Site A.  This works - all phones ring as expected.  The blast group has a "no answer forward" destination of "other" set to an AA back in Site B.  This is not working.  The blast group just rings and rings and rings.


Can anybody help?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
David Trad Sat, 12/10/2011 - 15:41
User Badges:
  • Gold, 750 points or more
  • Cisco Designated VIP,

    2013 Small Business

Hi John,


You need to check and see if Site-A has a Dial-Peer that references back to Site-B's AA.


You may also need to capture a Dial-Peer debug for us to see what is going on, but your scenario should work so long as there is a call routing path to the destination and the site can reach the other end.


Actually one way to test this, is to see if you can call Site-B's AA from Site "A" just by dialing it.



Cheers,


David.

Actions

This Discussion