cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3573
Views
0
Helpful
8
Replies

Setup WLAN using 802.1X Windows PKI

mml4cisco
Level 1
Level 1

Is it possible to setup the WLC 2504 to use Windows 2008 PKI to authenticate domain machines automatically to WLAN?

8 Replies 8

Scott Fella
Hall of Fame
Hall of Fame

You would need a radius server and then you can do 802.1x using machine authentication.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Thanks. Any steps by steps configuration guide I can follow?

What radius server would you use? IAS, NPS, Cisco ACS. I will try to find a link.

Sent from my iPhone

-Scott
*** Please rate helpful posts ***

windows 2008 NPS

Here is how to setup NPS

http://www.fatofthelan.com/technical/using-windows-2008-for-radius-authentication/

http://araihan.wordpress.com/2010/04/30/complete-guide-to-build-a-cisco-wireless-infrastructure-using-cisco-wlc-5500-cisco-1142-ap-and-microsoft-radius-server/

Sent from my iPhone

-Scott
*** Please rate helpful posts ***

Here are some..

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080921f67.shtml

http://m.techrepublic.com/article/ultimate-wireless-security-guide-manual-peap-deployment-for-windows-wireless-client/6148574

Sent from my iPhone

-Scott
*** Please rate helpful posts ***

The 802.1x always uses the Windows users to authenticate instead of the machine ID for authentication. How can I force the WLC to use machine authentication?

it's not the wlc.. It's the windows client and radius. Windows XP requires a registry hack and Widows vista and 7 has the option in the wireless profile.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: