12-21-2011 03:36 AM - edited 03-01-2019 07:02 AM
Hi, we have Nexus 5596p and we can't create any ip prefix-lists for redistributing routes, although in the NX-OS configuration guide says that it is possible. Can you please give me a any hint ?
Version of NX-OS on 5596 UP:
kickstart image file is: bootflash:///n5000-uk9-kickstart.5.1.3.N1.1.bin
system image file is: bootflash:///n5000-uk9.5.1.3.N1.1.bin
DC_Strumica_SW1(config)# sh feature
Feature Name Instance State
-------------------- -------- --------
Flexlink 1 disabled
amt 1 disabled
bgp 1 disabled
cts 1 disabled
dhcp 1 disabled
dot1x 1 disabled
eigrp 1 enabled
eigrp 2 enabled
eigrp 3 enabled (not-running)
eigrp 4 enabled (not-running)
eth_port_sec 1 disabled
fcoe 1 disabled
fcoe-npv 1 disabled
fex 1 enabled
glbp 1 disabled
hsrp_engine 1 enabled
http-server 1 disabled
interface-vlan 1 enabled
lacp 1 enabled
ldap 1 disabled
lldp 1 enabled
msdp 1 disabled
ospf 1 disabled
ospf 2 disabled
ospf 3 disabled
ospf 4 disabled
pim 1 disabled
poe 1 disabled
private-vlan 1 disabled
privilege 1 disabled
ptp 1 disabled
rip 1 disabled
rip 2 disabled
rip 3 disabled
rip 4 disabled
sshServer 1 enabled
tacacs 1 enabled
telnetServer 1 disabled
udld 1 enabled
vem 1 disabled
vmfex 1 disabled
vpc 1 enabled
vrrp 1 disabled
vtp 1 disabled
DC_Strumica_SW1(config)# ip ?
access-list Configure access list
adjmgr AM information
arp Configure ARP parameters
as-path BGP autonomous system path filter
auto-discard Auto 0.0.0.0/0 discard route
community-list Add a community list entry
dns Configure dns client
domain-list Add additional domain names
domain-lookup Enable/Disable DNS
domain-name Specify default domain name
eigrp EIGRP clear commands
extcommunity-list Add a extcommunity list entry
host Add an entry to the ip hostname table
igmp IGMP configuration commands
igmp IGMP global configuration commands
internal Commands for internal use
load-sharing ECMP load-sharing
mfwd Configures Global IP Multicast Forwarding
mroute Configure multicast RPF static route
name-server Specify nameserver address
radius Radius server
route Route information
routing Routing information
source-route IP source routing option
tacacs Tacacs server
tcp Global TCP parameters
telnet Configure telnet
tftp Configure TFTP client
12-21-2011 06:09 PM
There is a new bug opened against this. You will have to fall back to 5.0(3)N2(2b) to configure prefix-list.
I cannot share the bug ID right now, it is still internal.
Regards,
jerry
01-05-2012 06:19 AM
This is the bug
Will be fixed in 5.1(3)N1(1a)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: