cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2213
Views
0
Helpful
2
Replies

Nexus 5596P

hotshot979
Level 1
Level 1

Hi, we have Nexus 5596p and we can't create any ip prefix-lists for redistributing routes, although in the NX-OS configuration guide says that it is possible. Can you please give me a any hint ?

Version of NX-OS on 5596 UP:

kickstart image file is: bootflash:///n5000-uk9-kickstart.5.1.3.N1.1.bin

                system image file is:    bootflash:///n5000-uk9.5.1.3.N1.1.bin

DC_Strumica_SW1(config)# sh feature

Feature Name          Instance  State  

--------------------  --------  --------

Flexlink              1         disabled

amt                   1         disabled

bgp                   1         disabled

cts                   1         disabled

dhcp                  1         disabled

dot1x                 1         disabled

eigrp                 1         enabled

eigrp                 2         enabled

eigrp                 3         enabled (not-running)

eigrp                 4         enabled (not-running)

eth_port_sec          1         disabled

fcoe                  1         disabled

fcoe-npv              1         disabled

fex                   1         enabled

glbp                  1         disabled

hsrp_engine           1         enabled

http-server           1         disabled

interface-vlan        1         enabled

lacp                  1         enabled

ldap                  1         disabled

lldp                  1         enabled

msdp                  1         disabled

ospf                  1         disabled

ospf                  2         disabled

ospf                  3         disabled

ospf                  4         disabled

pim                   1         disabled

poe                   1         disabled

private-vlan          1         disabled

privilege             1         disabled

ptp                   1         disabled

rip                   1         disabled

rip                   2         disabled

rip                   3         disabled

rip                   4         disabled

sshServer             1         enabled

tacacs                1         enabled

telnetServer          1         disabled

udld                  1         enabled

vem                   1         disabled

vmfex                 1         disabled

vpc                   1         enabled

vrrp                  1         disabled

vtp                   1         disabled

DC_Strumica_SW1(config)# ip ?

  access-list        Configure access list

  adjmgr             AM information

  arp                Configure ARP parameters

  as-path            BGP autonomous system path filter

  auto-discard       Auto 0.0.0.0/0 discard route

  community-list     Add a community list entry

  dns                Configure dns client

  domain-list        Add additional domain names

  domain-lookup      Enable/Disable DNS

  domain-name        Specify default domain name

  eigrp              EIGRP clear commands

  extcommunity-list  Add a extcommunity list entry

  host               Add an entry to the ip hostname table

  igmp               IGMP configuration commands

  igmp               IGMP global configuration commands

  internal           Commands for internal use

  load-sharing       ECMP load-sharing

  mfwd               Configures Global IP Multicast Forwarding

  mroute             Configure multicast RPF static route

  name-server        Specify nameserver address

  radius             Radius server

  route              Route information

  routing            Routing information

  source-route       IP source routing option

  tacacs             Tacacs server

  tcp                Global TCP parameters

  telnet             Configure telnet

  tftp               Configure TFTP client

2 Replies 2

Jerry Ye
Cisco Employee
Cisco Employee

There is a new bug opened against this. You will have to fall back to 5.0(3)N2(2b) to configure prefix-list.

I cannot share the bug ID right now, it is still internal.

Regards,

jerry

Prashanth Krishnappa
Cisco Employee
Cisco Employee
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: