×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

QoS on NM-16ESW

Unanswered Question
Dec 25th, 2011
User Badges:

Hi


My question is what QoS mechanisms are supported on this module? Basically it is a switch module and should support all L2 QoS features such as SRR or WRR queuing. But it could also add "routed" ports to the router chassis (with "no switchport" command). And it do accept policy-map with hierarchical QoS configuration in such mode. For example -


interface FastEthernet1/3

no switchport

bandwidth 10000

ip address 10.1.1.1 255.255.255.248

  service-policy output 10Meg


policy-map 10Meg
class VOIP
    priority 2048
class ROUTING
    bandwidth 512
class SCAVENGER
   police cir 1000000
class WWW

    bandwidth 2048
class class-default
    shape average 5000000


So we can see it accept LLQ, CBWFQ, shaping and police related commands. But it seems to me that absolutely nothing works except POLICE-related statements. So I wonder whether it is possible to make LLQ, CBWFQ and GTS working on this module? I use Cisco 3825 router with IOS version 12.4(24)T.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion