×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Tunnel Problem from New ASA to Working ASA

Unanswered Question
Dec 27th, 2011
User Badges:

I have a working asa at the home office with 56 tunnels out to satellite stations.  We recently acquired another office and trying to get a tunnel working back to the home office.  The tunnel will not come up nor do I see any traffic on it using the debug isakmp or debug ipsec commands.


Here's the working config.  Assuming that the ASA in the home office is mirrored configuration for the tunnel, does anyone see anything wrong with this config?


interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

shutdown

!

interface Ethernet0/2

shutdown

!

interface Ethernet0/3

shutdown

!

interface Ethernet0/4

shutdown

!

interface Ethernet0/5

shutdown

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

ip address 172.25.44.254 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

ip address 108.232.238.84 255.255.255.248

!

boot system disk0:/asa824-k8.bin

boot system disk0:/asa722-k8.bin

ftp mode passive

dns domain-lookup outside

dns server-group DefaultDNS

name-server 68.94.156.1

name-server 68.94.157.1

domain-name default.domain.invalid

access-list outside_access_in extended permit tcp any host 108.214.237.84 eq 11

access-list inside_nat0_outbound extended permit ip 172.25.44.0 255.255.255.0 172.20.200.0 255.255.255.0

access-list inside_nat0_outbound extended permit ip 172.25.44.0 255.255.255.0 172.20.100.0 255.255.255.0

access-list outside_1_cryptomap extended permit ip 172.25.44.0 255.255.255.0 172.20.200.0 255.255.255.0

access-list outside_2_cryptomap extended permit ip 172.25.44.0 255.255.255.0 172.20.100.0 255.255.255.0

pager lines 24

logging enable

logging asdm errors

mtu inside 1500

mtu outside 1500

icmp unreachable rate-limit 1 burst-size 1

asdm image disk0:/asdm-642.bin

no asdm history enable

arp timeout 14400

global (outside) 1 interface

nat (inside) 0 access-list inside_nat0_outbound

nat (inside) 1 0.0.0.0 0.0.0.0

static (inside,outside) tcp interface 11 172.25.44.2 www netmask 255.255.255.255

access-group outside_access_in in interface outside

route outside 0.0.0.0 0.0.0.0 108.214.237.86 1

timeout xlate 3:00:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-record DfltAccessPolicy

nac-policy DfltGrpPolicy-nac-framework-create nac-framework

reval-period 36000

sq-period 300

aaa authentication enable console LOCAL

aaa authentication http console LOCAL

aaa authentication serial console LOCAL

aaa authentication ssh console LOCAL

aaa authentication telnet console LOCAL

aaa authorization command LOCAL

http server enable

http 0.0.0.0 0.0.0.0 outside

http 0.0.0.0 0.0.0.0 inside

no snmp-server location

no snmp-server contact

snmp-server enable traps snmp authentication linkup linkdown coldstart

crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac

crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac

crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac

crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac

crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac

crypto ipsec transform-set myset esp-3des esp-md5-hmac

crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac

crypto ipsec security-association lifetime seconds 28800

crypto ipsec security-association lifetime kilobytes 4608000

crypto map outside_map 1 match address outside_1_cryptomap

crypto map outside_map 1 set peer 84.212.62.34

crypto map outside_map 1 set transform-set myset

crypto map outside_map 2 match address outside_2_cryptomap

crypto map outside_map 2 set peer 84.212.60.2

crypto map outside_map 2 set transform-set ESP-3DES-MD5

crypto map outside_map interface outside

crypto isakmp enable outside

crypto isakmp policy 1

authentication pre-share

encryption 3des

hash md5

group 2

lifetime 86400

no crypto isakmp nat-traversal

telnet timeout 5

ssh 0.0.0.0 0.0.0.0 inside

ssh 0.0.0.0 0.0.0.0 outside

ssh timeout 30

ssh version 2

console timeout 0

management-access inside

dhcpd auto_config outside

!


threat-detection basic-threat

threat-detection statistics access-list

threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200

webvpn

group-policy DfltGrpPolicy attributes

vpn-idle-timeout none

webvpn

  svc keepalive none

  svc dpd-interval client none

  svc dpd-interval gateway none

  svc compression deflate

  customization value DfltCustomization

username admin password vbv/ec7dyKqeaH4R encrypted privilege 15

tunnel-group 84.212.62.34 type ipsec-l2l

tunnel-group 84.212.62.34 ipsec-attributes

pre-shared-key *****

tunnel-group 84.212.60.2 type ipsec-l2l

tunnel-group 84.212.60.2 ipsec-attributes

pre-shared-key *****

!

class-map inspection_default

match default-inspection-traffic

!

!

policy-map type inspect dns preset_dns_map

parameters

  message-length maximum 512

policy-map global_policy

class inspection_default

  inspect dns preset_dns_map

  inspect ftp

  inspect h323 h225

  inspect h323 ras

  inspect rsh

  inspect rtsp

  inspect esmtp

  inspect sqlnet

  inspect skinny 

  inspect sunrpc

  inspect xdmcp

  inspect sip 

  inspect netbios

  inspect tftp

  inspect ip-options

!

service-policy global_policy global

prompt hostname context

call-home

profile CiscoTAC-1

  no active

  destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService

  destination address email [email protected]

  destination transport-method http

  subscribe-to-alert-group diagnostic

  subscribe-to-alert-group environment

  subscribe-to-alert-group inventory periodic monthly

  subscribe-to-alert-group configuration periodic monthly

  subscribe-to-alert-group telemetry periodic daily

Cryptochecksum:cdf40c985104c7afc07a6dcdd36f27e0

: end

asdm image disk0:/asdm-642.bin

no asdm history enable

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ajay chauhan Wed, 12/28/2011 - 03:44
User Badges:
  • Silver, 250 points or more

This end configuration looks fine .However you need to check other end config as well. Turn on logging and initiate traffic from this end to other end and paste the logs those can also help.


Thanks

Ajay

ChiCityCisco Wed, 12/28/2011 - 11:44
User Badges:

Thanks for the reply Ajay.  It was actually the provider not placing the ASA's IP into the DMZ.  The office uses a small business Uverse connection, and they need to provide a set of static IP's in a DMZ.


thanks,

Actions

This Discussion