×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

IPSLA Verification

Unanswered Question
Dec 29th, 2011
User Badges:

We have two internet connections name "outside" and "Voice".  The internet connection named "outside" is the main internet conection and the second internet connection "voice" is only used to reach a single IP address (9.9.9.9).  I would like it so that if either internet connection fails the connections will failover to the other active internet connection.  I going to implement this using IPSLA and would appreciate it if someone could review my config and verify if this will work.


Thanks


route outside 0.0.0.0 0.0.0.0 [public_ip] 1 track 1

route voice 0.0.0.0 0.0.0.0 [public_ip] 254


sla monitor 99

type echo protocol ipIcmpEcho [public_ip] interface outside

num-packets 3

frequency 10


sla monitor schedule 123 life forever start-time now

track 1 rtr 123 reachability



route voice 9.9.9.9 255.255.255.255 [public_ip] 1 track 1

route outside 9.9.9.9 255.255.255.255 [public_ip] 254


sla monitor 100

type echo protocol ipIcmpEcho [public_ip] interface voice

num-packets 3

frequency 10


sla monitor schedule 100 life forever start-time now

track 1 rtr 100 reachability

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Julio Carvajal Thu, 12/29/2011 - 14:59
User Badges:
  • Purple, 4500 points or more

Hello,


I do not see why this will setup will not work, if both interfaces can get to 9.9.9.9 everything should work.


Regards,


Julio

Actions

This Discussion