×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Configure 2801 with Multipoint Port Channel

Unanswered Question
Jan 5th, 2012
User Badges:

Hi All


   Is it possible to configure a Cisco 2801 router with Multipoint Port Channeling?


   A service provider dropped a 4.5Mbps ( 3x T1s ) to one of our customers without any equipment. They assume the CPE responsible.


   If so we would appreciate any links to documentation on this configuration. If not, what device will they need to buy from Cisco that can bundle these 3 T1s together then feed it into their router?


Thanks all,

Tom

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Reza Sharifi Thu, 01/05/2012 - 13:14
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Hi Tom,


Since the 2800 is being replaced by the 2900 series, you can get a 2921 with 4 port T1 module and terminated all your connection in this modules:  I am assuming they gave you 3 copper (RJ45) connections.


here is the data sheet::


http://www.cisco.com/en/US/prod/collateral/routers/ps5855/data_sheet_c36-609138.html


Also, here is the data sheet for the 3900 series routers.


http://www.cisco.com/en/US/prod/collateral/routers/ps10537/data_sheet_c78_553896.html


HTH

milkboy33 Fri, 01/06/2012 - 20:58
User Badges:

Reza we aren't looking for a new router. What I want to know if it the "multilink", as vmiller stated, can be configured on a 2801 with 3 WIC-1DSU-T1-V2.


Vmiller, do you know if that link you sent me will work on a 2801?

vmiller Mon, 01/09/2012 - 07:43
User Badges:
  • Gold, 750 points or more

Its pretty generic, more a function of what interfaces are available.

ppp multilink has been around for a while.


If you have a go on your own, make sure you understand the concepts behind the configuration.

Paolos remarks are based on experience.

paolo bevilacqua Sat, 01/07/2012 - 09:40
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Of course it can. It's a Cisco router, have you considered ?


Tip: for your networking needs, do not try DIY, hire a professional instead. You will be spared wasted time and frustation, and your business will enjoy guranteed professional results.

Actions

This Discussion