×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

SPAN Destination Port w. Ingress Function

Unanswered Question
Jan 11th, 2012
User Badges:

Hi Community,

I'm actually tryihg to configure a SPAN Destination Port which is also able to send and receive Traffic for the host itself. This feature should be possible with the "ingress" sub-command.


Here 's a sniplet of my config:

!

interface GigabitEthernet1/0/23

description *** SPAN DESTINATION PORT ***

switchport access vlan 178

switchport mode access

!

monitor session 1 source vlan 110                          // PhoneVLAN = 110

monitor session 1 destination interface Gi1/0/23 ingress untagged vlan 178                      // 178 = Access-VLAN für Host

!


With this config it's possible to receive the span traffic, but no "regular" traffic is received or send.


Maybe anybody has a idea...


Cheers


Torsten

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jonathan Schulenberg Wed, 01/11/2012 - 05:21
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

What model switch are you using? This is not supported on many lower-end switch models.

torsten.brink Wed, 01/11/2012 - 08:21
User Badges:

Hi,

It's 3750-24, and should be supported


Cheers

Torsten


Sent from Cisco Technical Support iPhone App

torsten.brink Sat, 01/14/2012 - 05:37
User Badges:

Hi NetPro's,

any idea's ?? Maybe I messed up the syntax?


Any feedback is welcome


Cheers


Torsten


Sent from Cisco Technical Support iPhone App

Actions

This Discussion