01-11-2012 04:58 AM - edited 03-16-2019 08:56 AM
Hi Community,
I'm actually tryihg to configure a SPAN Destination Port which is also able to send and receive Traffic for the host itself. This feature should be possible with the "ingress" sub-command.
Here 's a sniplet of my config:
!
interface GigabitEthernet1/0/23
description *** SPAN DESTINATION PORT ***
switchport access vlan 178
switchport mode access
!
monitor session 1 source vlan 110 // PhoneVLAN = 110
monitor session 1 destination interface Gi1/0/23 ingress untagged vlan 178 // 178 = Access-VLAN für Host
!
With this config it's possible to receive the span traffic, but no "regular" traffic is received or send.
Maybe anybody has a idea...
Cheers
Torsten
01-11-2012 05:21 AM
What model switch are you using? This is not supported on many lower-end switch models.
01-11-2012 08:21 AM
Hi,
It's 3750-24, and should be supported
Cheers
Torsten
Sent from Cisco Technical Support iPhone App
01-14-2012 05:37 AM
Hi NetPro's,
any idea's ?? Maybe I messed up the syntax?
Any feedback is welcome
Cheers
Torsten
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: