Sx300 - Missing Mirror Configuration on Firmware 1.1.2.0

Unanswered Question
Jan 22nd, 2012

Hi,

I have several SG300-10 and SF302-08P switches running with L2-mode, and after I upgraded their firmware to 1.1.2.0, they began to record the following logs every one hour.

- Severity: Warning

- Description: %COPY-W-TRAP: The mirror-config file is illegal due to failure of previous copy operation/s to mirror-config.

Also I found that I didn't see the Mirror Configuration file on the Configuration File Table in the Configuration Files Properties page.

I have had no problem so far but I don't think I can leave this situation as it is. Can someone give me any advice what I need to do, please?

Thanks

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 0 (0 ratings)
jjais Mon, 04/23/2012 - 02:45

Hi Akio,

I have the same issue on a SG300-28 upgraded to firmware 1.1.2.0.

Any advice from you or Cisco ?

Many thanks

rmanthey Mon, 04/23/2012 - 06:40

Hello all,

Can one or both of you call into the support center at 1-866-606-1866 and create a case, so we can better support this issue. We are interested in finding a quick solution for your problem, but we need to gather the information, so we can resolve this problem.

Thanks,

Cisco Small Business Support Center

Randy Manthey

CCNA, CCNA - Security

akiot.ascotrad Mon, 04/23/2012 - 16:07

Hello Randy,

I would like to contact the support center by e-mail instead of phone if it's possible.

Thanks

akiot.ascotrad Mon, 04/23/2012 - 15:46

Hi Jean-Philippe,

I have not worked out this issue yet.

In my environment,

- two out of three L2-mode SG300-10 express the logs.

- two L3-mode SG300-10 have no problem.

- one L2-mode SF302-08P expresses the logs.

- one SG200-50 has no problem.

All of the above are running with firmware 1.1.2.0.

Regards

Actions

Login or Register to take actions

This Discussion

Posted January 22, 2012 at 6:55 PM
Stats:
Replies:6 Avg. Rating:
Views:1373 Votes:0
Shares:0

Related Content

Discussions Leaderboard