01-26-2012 11:58 PM - edited 07-03-2021 09:27 PM
Which device is good to capture wireless beacon frames.
AirPcap or Linksys WUSB600N ver 1, ver 2 (Dual-band USB adapter)
I want to check whether AP sending WME values or not.
01-27-2012 12:27 AM
Your adapter selection will be driven by what software you select to sniff the traffic.
Both are good.
What software are you looking at ?
Omnipeek, airmagnet, wireshark ??
Sent from Cisco Technical Support iPhone App
01-27-2012 01:13 AM
Omnipeak and wireshark both have
01-27-2012 01:14 AM
Will it shows WME, 802.11e parameters. 4 Qos Queues?
01-27-2012 06:06 AM
From my own experience, I would go with the 600N and Omnipeek. It will show you the WMM and 802.11e QoS values.
Steve
Sent from Cisco Technical Support iPhone App
01-29-2012 11:05 PM
Which Omnipeak can capture. I have Linksys WUSB600N ver 1, ver 2 (Dual-band USB adapter)
but I tried on wireshark It doesn;'t show any 802.11 protocoal or beacon frames. Please suggest
01-30-2012 01:18 AM
I want to capture 802.11 frames using Linksys WUSB600N ver 1, ver 2 (Dual-band USB adapter and Omnipeak
Please guide me how i can do that?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide