I just converted one AP to LWAPP (CAPWAP) it worked at the first time. But when I tried to convert the second one it was succesful but it never associated to the WLC. Then tried with a different AP but same model and the same problem.
These are the logs I get:
(Cisco Controller) debug> capwap detail enable
*Jan 27 18:42:03.223: 68:ef:bd:1c:14:22 LWAPP Discovery Request AP Software Version: 0x3003300
*Jan 27 18:42:03.224: 68:ef:bd:1c:14:22 Received a Discover Request from 68:EF:BD:1C:14:22 via IP broadcast address but the source IP address (10.84.2.77) is not in any of the configured subnets. Rejecting the
From AP console:
*Mar 1 00:29:42.706: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER.comercio.fne
Translating "CISCO-LWAPP-CONTROLLER.comercio.fne"...domain server (10.80.1.58)
I am running 184.108.40.206 and it is an AIR-WLC4402-50-K9 and there are still 4 licenses available.
I'd appraciate any comments that would help to fix this out.
So you know if you ONLY have 1 AP manager interface configured on your WLC you will only ever get 48 access points on your controller even if its a 50 controller. You will need to add another AP manager OR configure in LAG.
JUST AN FYI