Remote VPN configuration on ASA5510 does not work for iPhone but working for PC

Unanswered Question


I have remote access vpn configured on ASA5510 (firmware version 7.22), the configuation works for PC using Cisco VPN client software without any problem.

But when I configured iPhone IPSEC VPN. The VPN connection cannot be setup after I entered username and password.

I monitored the log. It gave me the following. I am not sure what caused this problem. If you know something, please help!

3Jan 30 201217:18:11713119Group = TWVPN, Username = achen, IP =, PHASE 1 COMPLETED
3Jan 30 201217:18:11713902Group = TWVPN, Username = achen, IP =, QM FSM error (P2 struct &0x4b3ff20, mess id 0xd3072042)!
3Jan 30 201217:18:11713902Group = TWVPN, Username = achen, IP =, Removing peer from correlator table failed, no match!


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Marvin Rhoads Mon, 01/30/2012 - 07:08
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 Firewalling, Network Management, VPN

The " match!" error above usually indicates that there is no matching IPSec Phase 2 method between the ASA and the peer (iPhone in this case).

Please review the required settings here and verify that you have iPhone-compatible settings configured on your ASA.


This Discussion