Cisco 300 Series Visio Stencils?

Unanswered Question
Feb 4th, 2012

I apologize if this discussion has already come up, but...

Does anyone know of any Visio stencils for the Cisco 300 Series SMB Managed Switches?

(specifically, for my shop, the SG300-28P?)

I've looked around, (VisioCafe, Google), but not found any 300 Series stencils.

Found the ESW 500 Series - which is CLOSE, but not the same...

Any help would be VERY appreciated!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
thomas.clark@cc... Tue, 02/21/2012 - 08:28

I'd love to see more stencils for the small business products as well. I have quite the collection of SG300 switches these days...

Brett Newman Tue, 02/28/2012 - 14:55

I'm sorry I didn't see these questions sooner...

There is a Cisco Small Business 300 Series Switches download on the Visio on that contains:

SG 300-10
SF 300_24
SF 300_48

It's not complete but perhaps it's helpful.  I've contacted the product group about adding more products to the stencil.

Brett Newman

Cisco Visio Development

Visimation Inc.

leoncargile Tue, 02/28/2012 - 15:00


Thanks a ton!

VERY helpful!

Sent from my iPhone

leoncargile Tue, 02/28/2012 - 15:10

I'd LOVE to get a stencil for the SG300-28P!

Please let the Product Group folks know that there's a market for the

SG300-28P customers out there!

Thanks again!

On Tue, Feb 28, 2012 at 1:56 PM, brenewma <

thomas.clark@cc... Wed, 02/29/2012 - 07:50

Am I blind? I don't see the Small Business Stencils for the 300 series. I've downloaded many of the visio stencils but haven't found any of the 300 series stencils.

leoncargile Wed, 02/29/2012 - 07:53

I couldn't find them yesterday either.

Sent from my iPhone

Brett Newman Fri, 03/02/2012 - 13:49

Wow... you guys are certainly NOT blind.  That stencil has disappeared.  I will need to re-post it. I'm very sorry for the inconvenience and I don't know how it happened.

Brett Newman

Cisco Visio Development

Visimation Inc.

Sergiy Pyvovaroff Fri, 04/06/2012 - 14:19

Hello All!


I need SB 300 switch visio icons to.


sboardman Wed, 03/21/2012 - 07:25

Thanks for your help on this Brett.  Any luck on getting these posted.

Brett Newman Wed, 03/21/2012 - 11:47

Hi Steve,

I have not yet been able to identify a sponsor for this in the product group.  I've just sent another email request.  I wish I could be more helpful at this point.

Brett Newman

Cisco Visio Development

Visimation Inc.

sboardman Wed, 03/21/2012 - 12:03

Thank you – I appreciate the response!

randy.jorgensen Thu, 03/29/2012 - 14:15

I desperately need them too!

Randy Jorgensen

jason.r.laporte... Wed, 04/11/2012 - 12:58


Has there been any change in the status of the CIsco GS-300 Visio stencils? I could really use one.

Thank you

Jason LaPorte

leoncargile Wed, 04/11/2012 - 13:08

I haven't checked lately, but I also could still use stencils for the SG300-28P, specifically.


Sent from my iPhone

Brett Newman Mon, 04/23/2012 - 13:37

Hi Jason,

No change yet... still in the production queue.  There have been so many high priority requests from product groups that several projects are way behind schedule and I apoloigze for that.  The 300 series is close though I can't commit to a specific date.

Brett Newman

Cisco Visio Development

Visimation Inc.

daniel-pugh Mon, 04/16/2012 - 08:09

it would be great if the stencils could be posted for 300 series switches



acockr Fri, 05/25/2012 - 00:47

Hi Brett,

I see that there's not been a lot of movement on this post for a little while. Really keen to get hold of the 300 series Visio's is there anywhere else to get the original set?

I'm after the SF302-08P with/without rack mount kit, but a generic would suffice for now.



Brett Newman Fri, 05/25/2012 - 12:31

Hi Richard,

I'm sorry but the SF302-08P is not in our approved production list:











I can put in the request for funding but it's not a speedy process.



jason.r.laporte... Fri, 05/25/2012 - 12:40

Any news on the SG300-10P

Brett Newman Tue, 05/29/2012 - 11:56

We expect to produce these within the next week to 10 days.  The queue has been huge lately and it's also been interupted with "urgent" requests that need to be accomodated.  My apologies but we're working on it.



Brett Newman Fri, 06/01/2012 - 16:08

There will be a new Cisco Small Business 300-500 Series Switches Visio stencil on the download site within the next several days.  It's been submitted but unfortunately I cannot control when the web team will actually post it.  Usually it takes 24 hours but I've had several requests that took 3 days or more.  Look for it in the Switches category on the download page:

Brett Newman

Cisco Visio Development

Visimation Inc.

jason.r.laporte... Tue, 06/05/2012 - 12:35

It was just posted. Thanks for the help!

mbeckenbach Mon, 06/11/2012 - 01:38

Where did you find that download?

When i look at the download list, there are only the ESW 500 but no 300 Switches.

lokibjensen Tue, 08/20/2013 - 07:11

Hello Cisco,

Any chance that the full list of SG300 and SG500 switches will be included in the stencil download any time soon?  I ask because prior to the current posting I had already custom created my own for most of the 300 series switches.  However, I'm immediately in need of the SG300-20 and don't necessarily have the time to create another from scratch.

I'm also certain that in the near future I'll need the full range of SG500 series as well.  Is there a reason why some switches are included and some are not?  Obviously the PoE vs. non-PoE vs. PoE+ wouldn't necessarily be an issue if there aren't separate ones for each.  However, having the full portfolio of switch port numbers would be extremely helpful.


Brett Newman Wed, 08/28/2013 - 19:14


Due to the large size of the All Products file, it no longer contains all of the latest updates.  We are considering ways to reduce the size of the download but for now please go to the direct link for the Cisco 300-500 series:


Brett Newman

Cisco Visio Production

Visimation Inc.

lokibjensen Thu, 08/29/2013 - 06:49

Hi there and thanks for the reply.  Unfortunately that link delivers the same file as available on the site.  It only has a few of the switches on it and not even close to the full list or the specific one I had requested.  I have since had to create my own, again, which is extremely unfortunate due to the amount of time it takes.

Vincent_Duvernet Wed, 09/05/2012 - 10:18


- I've found a little bug on the SG300-28P stencil.

the port '2' is shown twice instead of port 3.

- Why the SA-540 doesn't have connector for LAN ports near the physical LEDs shown ?


Brett Newman Fri, 09/14/2012 - 18:46

Hi Vincent,

Thank you for finding that, and I apoogize for being slow to respond. I was on vacation the past two weeks.  We've corrected that port number problem and I just submitted the update to be posted on the download page.  It usually takes a day or two for that team to complete the process.

Brett Newman

Cisco Visio Development

Visimation Inc.


Login or Register to take actions

This Discussion

Posted February 4, 2012 at 11:45 AM
Replies:29 Overall Rating:5
Views:22387 Votes:0

Related Content