cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1133
Views
10
Helpful
4
Replies

LWAPP in LMS 4.1is showing unreacheble

Naisamuddin pk
Level 1
Level 1

Hi team,

I added Cisco AIR-1142 AP which is registered with WLC 5508 in to LMS 4.1. After restarting AP, the status in LMS showing as unreachable. I am not able to save the configuration in AP and also not able to add SNMP parameters . Any one please suggest what is the issue or what are the normal procedure to add a LWAPP in LMS.

Thanks in advance.

Regards,

Naisam

4 Replies 4

Sergey Drugov
Level 1
Level 1

Me too, pls reply to this issue!

answers is simple: a LWAP AP does not run SNMP !

hence it will never be managed by CP LMS

only autonomous AP that runs CDP and SNMP are supported.

You can instead use CP NCS, or nowadays CiscoPrime Infrastructur

Joe Clarke
Cisco Employee
Cisco Employee

You cannot manage LWAPPs in LMS since (as it was pointed out) they do not run SNMP.  NCS (formerly WCS) will manage LWAPPs via the WLCs.  As LMS converges more with NCS, the wireless and wired management features will converge as well.

For now, you can block the LWAPP IPs in LMS Discovery or add their CDP IDs to the list of excluded CDP IDs per this doc https://supportforums.cisco.com/docs/DOC-9005 .

Sergey Drugov
Level 1
Level 1

Thanks for answers.

Sent from Cisco Technical Support Android App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: