cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1366
Views
0
Helpful
6
Replies

Nexus 1010 boot failed

MENG YUAN HSIEH
Level 1
Level 1

Hi all,

I tried to boot nexus 1010, but only cimc can login. The serial console did not show any information, and still no response. So I tried to connect keyboard and monitor, both are no response. In addition, the nic port is down too.

Have any idea? Or who to troubleshooting it?

Sent from Cisco Technical Support iPhone App

6 Replies 6

padramas
Cisco Employee
Cisco Employee

Hello Meng,

Are you able to access the CIMC via web browser ?

If yes, do you observe any error messages ?

Any output on the KVM console ?

Padma

MENG YUAN HSIEH
Level 1
Level 1

Hello Padma,

Are you able to access the CIMC via web browser ?

-> Yes.

If yes, do you observe any error messages ?

-> No! All the status is "Good".

Any output on the KVM console ?

-> No! The KVM show "No Signal".

Sent from Cisco Technical Support iPhone App

Hello Meng,

Has this server worked before ?

Are you able to access the N1010 host CLI interface by doing SSH to CIMC IP address ?

ssh admin@

connect host

Padma

MENG YUAN HSIEH
Level 1
Level 1

Hello Padma,

Has this server worked before ?

-> Yes.

Are you able to access the N1010 host CLI interface by doing SSH to CIMC IP address ?

-> Yes.

ssh admin@ "connect host" did not show any response, and console can not return to CIMC.

Sent from Cisco Technical Support iPhone App

When you reboot N1010 from the KVM console, do you see any output?

Hi Yasemin,

After few day later. We used front panel port to connect monitor and keyboard, mouse and reboot it. It is work. But the back of the monitor port still did not work. BTW, the system can work now.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: