Nexus 1010 boot failed

Unanswered Question
Feb 6th, 2012
User Badges:

Hi all,


I tried to boot nexus 1010, but only cimc can login. The serial console did not show any information, and still no response. So I tried to connect keyboard and monitor, both are no response. In addition, the nic port is down too.


Have any idea? Or who to troubleshooting it?


Sent from Cisco Technical Support iPhone App

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
padramas Tue, 02/07/2012 - 00:22
User Badges:
  • Cisco Employee,

Hello Meng,


Are you able to access the CIMC via web browser ?

If yes, do you observe any error messages ?

Any output on the KVM console ?


Padma

MENG YUAN HSIEH Tue, 02/07/2012 - 07:10
User Badges:

Hello Padma,


Are you able to access the CIMC via web browser ?

-> Yes.

If yes, do you observe any error messages ?

-> No! All the status is "Good".

Any output on the KVM console ?

-> No! The KVM show "No Signal".




Sent from Cisco Technical Support iPhone App

padramas Tue, 02/07/2012 - 07:19
User Badges:
  • Cisco Employee,

Hello Meng,

Has this server worked before ?


Are you able to access the N1010 host CLI interface by doing SSH to CIMC IP address ?


ssh admin@

connect host



Padma

MENG YUAN HSIEH Tue, 02/07/2012 - 17:44
User Badges:

Hello Padma,


Has this server worked before ?

-> Yes.


Are you able to access the N1010 host CLI interface by doing SSH to CIMC IP address ?

-> Yes.


ssh admin@ "connect host" did not show any response, and console can not return to CIMC.




Sent from Cisco Technical Support iPhone App

Yasemin Akar Wed, 02/15/2012 - 13:02
User Badges:
  • Cisco Employee,

When you reboot N1010 from the KVM console, do you see any output?

MENG YUAN HSIEH Tue, 04/24/2012 - 08:06
User Badges:

Hi Yasemin,


After few day later. We used front panel port to connect monitor and keyboard, mouse and reboot it. It is work. But the back of the monitor port still did not work. BTW, the system can work now.

Actions

This Discussion