02-13-2012 12:58 PM - edited 03-04-2019 03:15 PM
I'm trying to diagnose a problem between an IAD 2431 (12.4(24)T6) and a 7206VXR (12.2(33)SRD4) where I see this in my logs on the IAD, repeating over and over...
Feb 13 15:42:13.573 EST: Mu101 MLP: Lost fragment 397A (all links out of sequence)
Feb 13 15:42:13.729 EST: Mu101 MLP: Lost fragment 3982 (all links out of sequence)
Feb 13 15:42:15.766 EST: Mu101 MLP: Lost fragment 3988 (all links out of sequence)
Feb 13 15:42:15.922 EST: Mu101 MLP: Lost fragment 3990 (all links out of sequence)
Feb 13 15:42:17.774 EST: Mu101 MLP: Lost fragment 3996 (all links out of sequence)
Feb 13 15:42:20.474 EST: Mu101 MLP: Lost fragment timeout, seq 399C
Feb 13 15:42:21.498 EST: Mu101 MLP: Lost fragment timeout, seq 399E
Feb 13 15:42:22.030 EST: Mu101 MLP: Lost fragment 39A0 (all links out of sequence)
Feb 13 15:42:22.394 EST: Mu101 MLP: Lost fragment 39A6 (all links out of sequence)
Feb 13 15:42:25.182 EST: Mu101 MLP: Lost fragment 39B6 (all links out of sequence)
Feb 13 15:42:26.766 EST: Mu101 MLP: Lost fragment 39BE (all links out of sequence)
Feb 13 15:42:28.682 EST: Mu101 MLP: Lost fragment 39C4 (all links out of sequence)
Feb 13 15:42:30.770 EST: Mu101 MLP: Lost fragment 39CA (all links out of sequence)
Feb 13 15:42:33.022 EST: Mu101 MLP: Lost fragment 39D0 (all links out of sequence)
Feb 13 15:42:35.018 EST: Mu101 MLP: Lost fragment 39D4 (all links out of sequence)
Feb 13 15:42:37.066 EST: Mu101 MLP: Lost fragment 39DA (all links out of sequence)
Feb 13 15:42:39.102 EST: Mu101 MLP: Lost fragment 39E0 (all links out of sequence)
Feb 13 15:42:41.978 EST: Mu101 MLP: Lost fragment timeout, seq 39EC
Feb 13 15:42:42.958 EST: Mu101 MLP: Lost fragment 39EE (all links out of sequence)
Feb 13 15:42:43.982 EST: Mu101 MLP: Lost fragment 39F6 (all links out of sequence)
Feb 13 15:42:45.082 EST: Mu101 MLP: Lost fragment timeout, seq 39FE
Feb 13 15:42:45.466 EST: Mu101 MLP: Lost fragment 3A00 (all links out of sequence)
Feb 13 15:42:46.470 EST: Mu101 MLP: Lost fragment 3A04 (all links out of sequence)
Feb 13 15:42:49.210 EST: Mu101 MLP: Lost fragment timeout, seq 3A0E
Feb 13 15:42:50.234 EST: Mu101 MLP: Lost fragment timeout, seq 3A10
Feb 13 15:42:50.450 EST: Mu101 MLP: Lost fragment 3A12 (all links out of sequence)
Feb 13 15:42:51.474 EST: Mu101 MLP: Lost fragment 3A1A (all links out of sequence)
Feb 13 15:42:53.482 EST: Mu101 MLP: Lost fragment 3A26 (all links out of sequence)
Feb 13 15:42:53.942 EST: Mu101 MLP: Lost fragment 3A30 (all links out of sequence)
Feb 13 15:42:56.150 EST: Mu101 MLP: Lost fragment 3A3E (all links out of sequence)
Feb 13 15:42:58.874 EST: Mu101 MLP: Lost fragment timeout, seq 3A44
Everything I can find with my google-foo references MLPPPoFR or MLPPPoA, but I'm doing neither... just straight MLPPP. VWIC-2MFT-T1 on the IAD,
PA-2CT3 on the 7206.
IAD Config:
----------------
interface Multilink101
ip address <removed>
no ip redirects
no cdp enable
ppp multilink
ppp multilink group 101
ppp multilink fragment disable
max-reserved-bandwidth 99
!
interface Serial1/0:1
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 101
max-reserved-bandwidth 99
!
interface Serial1/1:1
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 101
max-reserved-bandwidth 99
7206 Config:
------------------
interface Multilink14
ip address <removed>
no ip redirects
ppp multilink
ppp multilink group 14
ppp multilink fragment disable
no clns route-cache
!
interface Serial2/1/9:0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 14
no clns route-cache
!
interface Serial2/1/10:0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 14
no clns route-cache
end
02-14-2012 06:54 AM
Try to lower the max-reserved-bandwith value, or have a look on this paper it explain how to configure on T1 link.
http://www.cisco.com/en/US/tech/tk39/tk48/technologies_tech_note09186a00800fe2c1.shtml
Hope it helps
Eugen
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: