×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Max digits on forward all

Answered Question
Feb 14th, 2012
User Badges:

Hi all, I have a CUCM 8.6.2 and my users when try to transfer all calls from the phones (with softkey) can digit only one digits.

When I can set the max number of digits of the call transfer?


If I set the CFA from web interface all is working.


Thanks


Enrico

Correct Answer by Chris Deren about 5 years 6 months ago

There is no such setting, this must be either pattern overlap issue or Calling Search Space issue, make sure the CSS and secondary CSS on the DN have access to the patterns you are attempting to enter.


HTH,


Chris

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Chris Deren Tue, 02/14/2012 - 06:52
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

There is no such setting, this must be either pattern overlap issue or Calling Search Space issue, make sure the CSS and secondary CSS on the DN have access to the patterns you are attempting to enter.


HTH,


Chris

Actions

This Discussion