×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco 1522 - getting radios enabled

Unanswered Question
Feb 14th, 2012
User Badges:

I have added the AP to the mac filter list, so I can see it in the controller


The b/g antennas are 5dBi so I set it to 10 x .5

the a antennas are 8 dBi so I set them to 16 x .5


I am not able to get the radios to come online.  Is there something I am missing?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Stephen Rodriguez Tue, 02/14/2012 - 12:24
User Badges:
  • Purple, 4500 points or more

Is the B/G and the A/N networks enabled globally?


Steve

burnsidestev Tue, 02/14/2012 - 12:57
User Badges:

Yes,

this controller has 3500 series APs on it as well that are all functioning.  it is on code 7.0.116.0.

burnsidestev Tue, 02/14/2012 - 14:32
User Badges:

I figured out the issue.  I had it connected to a PoE+ switch.  it was enough power to boot, but not power the radios.

Actions

This Discussion