02-14-2012 12:16 PM - edited 07-03-2021 09:35 PM
I have added the AP to the mac filter list, so I can see it in the controller
The b/g antennas are 5dBi so I set it to 10 x .5
the a antennas are 8 dBi so I set them to 16 x .5
I am not able to get the radios to come online. Is there something I am missing?
02-14-2012 12:24 PM
Is the B/G and the A/N networks enabled globally?
Steve
02-14-2012 12:57 PM
Yes,
this controller has 3500 series APs on it as well that are all functioning. it is on code 7.0.116.0.
02-14-2012 02:32 PM
I figured out the issue. I had it connected to a PoE+ switch. it was enough power to boot, but not power the radios.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide