02-15-2012 02:17 AM - edited 03-04-2019 03:16 PM
Hi Netpro
how to show all the module on the ASR 1004?
thanks
02-15-2012 05:19 AM
Hi,
Try this
show diag [all | chassis | slot | subslot] eeprom
show platform
I used this link
http://www.cisco.com/en/US/docs/ios-xml/ios/interface/command/ir-cr-book.html
HTH
Alex
02-15-2012 09:25 AM
Hi Alex
I got "Forbiden Application"
Pls can u doenload and submit it
can u help me to administer a BGP Router connected to 2 different ISPs we r ucing public real as
thanks
02-16-2012 01:16 AM
02-17-2012 02:09 AM
thanks alex
10-21-2013 01:28 PM
I believe you have to specify on CLI 'card type' and then you will be able to see the serial interfaces. I ran into this same thing when I was installing a t3 sub module.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: