×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

VPN users connect but can't access LAN servers

Unanswered Question
Feb 16th, 2012
User Badges:

I have a ASA 5505 and setup SSL VPN. My users can connect to the VPN but can't get access to any of the internal servers. Can someone tell me what I am missing?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Kimberly Adams Thu, 02/16/2012 - 10:56
User Badges:
  • Silver, 250 points or more

It would be very helpful if you could post your configuration.  But initially my first thought, without seeing the configuration, is your LAN or LANS allowed in your access-lists for the VPN?


Thanks,


Kimberly

rohaverm Thu, 02/16/2012 - 11:05
User Badges:

I hope the configuration you are talking about is of SSL Client. Non of the internal servers are accessible.So considering it to be "tunnel all", check NAT exemption between the inside subnet and client pool if interface access-li (if any) is at its place.



RV

Jeff Van Houten Thu, 02/16/2012 - 18:54
User Badges:
  • Silver, 250 points or more

Do your servers have a route to the VPN client addresses?


Sent from Cisco Technical Support iPad App

Actions

This Discussion