×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Copy flash TFTP Error

Unanswered Question
Feb 21st, 2012
User Badges:

I have a 3550 switch that I am trying to upgrade the IOS on.

I am trying to copy to a TFTP server.

I am receiving a socket error.

I saw that this can be fixed with


Switch#config t

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)#no service config

Switch(config)#exit

Switch#

00:13:47: %SYS-5-CONFIG_I: Configured from console by console

Switch#reload


I have done this 3 times to no avail.

My TFTPd32 server on my pc is working fine.

Here is the error


Switch#sh flas


Directory of flash:/

     2  -rwx         556   Mar 1 1993 00:33:53 +00:00  vlan.dat

    4  -rwx        3775   Mar 1 1993 00:37:54 +00:00  config.text

    5  -rwx          24   Mar 1 1993 00:37:54 +00:00  private-config.text

    6  -rwx     5687963  Mar 16 2007 01:05:23 +00:00  c3550-ipbasek9-mz.122-25.SEB4.bin

    8  drwx         192   Mar 1 1993 00:04:40 +00:00  c3550-i9q3l2-mz.121-22.EA1a


15998976 bytes total (3300864 bytes free)

Switch#copy flash tftp

Source filename []? c3550-ipbasek9-mz.122-25.SEB4.bin

Address or name of remote host []? 192.168.1.132

Destination filename [c3550-ipbasek9-mz.122-25.SEB4.bin]?

%Error opening tftp://192.168.1.132/c3550-ipbasek9-mz.122-25.SEB4.bin (Socket error)



HELP!! THANKS IN ADVANCE

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
terrelstinnett Tue, 02/21/2012 - 14:48
User Badges:

nope, i am consoled into the switch.

my ethernet port is broken.

-----------------------------------------------------

DSW#show int vlan1

Vlan1 is up, line protocol is down

  Hardware is EtherSVI, address is 0012.4339.a880 (bia 0012.4339.a880)

  Internet address is 192.168.1.133/24

---------------------------------------------------------

DSW#ping 192.168.1.132



Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 192.168.1.132, timeout is 2 seconds:

.....

Success rate is 0 percent (0/5)

------------------------------------------------------------

TFTPd32 has no security.

My firewall is turned off.


I dont know whats going on.

Leo Laohoo Tue, 02/21/2012 - 14:34
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Duplicate post. 

Actions

This Discussion

Related Content